M&M Cycles is now Mozaic Racing! Read About Us.

Andrews Cams for Evolution Motors

Andrews Cams for Evolution Motors

This part is bike specific. It will not fit all makes / models / years.

If you enter fitment information, we'll only show you the options that work for your bike.

$ 156.45 - 157.50 $ 23.50 Savings Enter your bike's fitment to see our inventory levels. Free Shipping Eligible! $0.00 Tax Collected Outside Ohio
Add to Cart

Product Overview

EV3 GRIND CAM
Bolt-in cam for light bikes (FXRS, etc.) adds significant mid-range power without affecting idle
A 6000+ rpm cam for stock heads and springs with hydraulic lifters

EV5 GRIND CAM
Designed for mildly stroked motors or motors with head work done
Excellent power in the 2500-6500 rpm range
Works with stock hydraulics, with stock spring travel set to .560" minimum

EV7 GRIND CAM
Uses stock springs
Designed for big-inch stroker motors with head work
Works with stock hydraulics, with stock spring travel set to .560" minimum
Excellent in the 2800-6500 rpm range

EV13 GRIND CAM
Uses stock springs; works with carbs or fuel injection
Bolt-in cam for street or touring use with more mid-range and upper-end power than the stock 88 EV cams
Especially effective in reducing oil temperature

EV23 GRIND CAM
Uses stock springs; works with carbs or fuel injection
Crisp throttle response and strong pulling power from 1500 to 6000 rpm
Bolt-in cam for heavier touring bikes and high-geared bikes with 65-tooth rear pulleys
Works well in higher altitudes

EV27 GRIND CAM
Uses stock springs; works with carbs or fuel injection
Pulls from 1500 to 6000 rpm
Bolt-in street cam with fast open and close ramps
Similar timing to EV3, but designed to produce a very broad torque band

EV31 GRIND CAM
Basically an EV27 cam with timing set for superchargers or big-inch motors with 10.5+ compression ratio
Super power for supercharged engines

EV38 GRIND CAM
Bolt-in for lighter bikes (FXLR, etc.)
Lower lift exhaust for easy installation
Longer exhaust cam lowers oil temperature
Great mid-range and high-end power

EV46 GRIND CAM
Bolt-in performance cam with fast open and close ramps
Similar to "EV3" but higher static compression pressure for 4000+ rpm with stock heads and hydraulic lifters

EV51 GRIND CAM
Long duration for modified street motors
Power range from 3000-6500 rpm
Easy installation
Works with stock hydraulics

EV59 GRIND CAM
Designed for modified 80" to 88" motors
For use with high lift springs and collars
Very broad powerband to 6000 rpm

EV72 GRIND CAM
Upgraded EV7, for 92" or larger street motors
OK for use with hydraulic lifters
For use with Andrews springs and titanium collars
Very broad powerband, 2800-6000 rpm

FREE SHIPPING

FREE shipping on orders over $150 within the continental U.S. We ship Worldwide!
FITMENT GUARANTEE

We guarantee our product will fit on your vehicle our we pay return shipping.
LOW PRICES

Shop Mozaic Racing for Parts and Accessories for your Harley, Indian, Sport Bike, or Metric.